ASG’s friction washer is a highly efficient piece of washing equipment designed in Germany mainly for the purpose of cleaning PET flakes as well as plastic films. At the core of ASG’s friction washer is a long, fast-rotating shaft mounted with many tilted panels / paddles. Surrounding this rotating shaft is a mesh screen tunnel used for dewatering and filtering small contaminants. These are then encased within a large retangular casing where water jets and nozzles are directed at the mesh screen. The entire piece of machinery is then set at an incline with the dirty plastic stream being feed into a vertical feeder located on the lower end and cleaned plastics exiting on top.
The rotating shaft within ASG’s friction washer spins at nearly 1,000 rotations per minute, pieces of paper and cardboard are broken into small fibers and exit through the mesh screen. The remaining plastics are mixed at high speeds within the washer where friction between each plastic piece helps scrub off dirt and debris. Water is continuously added via water jets that spray at the mesh screen preventing potential clogging that may occur.
Models & Specifications
|Model #:||Motor Power:||Main Shaft Diameter:||Rotating Speed:||Capacity:|
|HXJ400||37KW||400mm||1400 RPM||400 – 800 KG/H|
|HXJ550||45KW||550mm||1200 RPM||600 – 1000 KG/H|
|HXJ750||55KW||750mm||1080 RPM||1200 – 2000 KG/H|
Place An Order
The general lead time for all single-piece, standard equipment orders is 30 days. For custom orders or complete washing lines, the lead time is between 60 – 90 days. The actual lead time will depend heavily on the complexity of the project as well as the amount of machinery we have in queue at the time of your order.