Blog

Film wrapping around the rotor and thick parts stalling the machine are the two most common shredder problems. Here is how cutting geometry, feeding method, overload protection and shaft configuration solve them for soft, rigid and mixed plastic waste.

A screw conveyor does more than turn: its flights push material forward and the material pushes back on the shaft. That axial thrust decides bearing life, seal wear and noise, and why two conveyors of the same size can last very differently.

See our plastic film pelletizing line turn PP, PE and BOPP film waste into reusable pellets: cutter compactor, extruder with melt filtration and the pelletizing system, suitable for LDPE, LLDPE, HDPE, PP and BOPP films and production scrap.

Watch the zig zag air separator remove paper labels from HDPE flakes: an adjustable upward airflow carries the light labels out through the top while the clean, heavier flakes drop to the bottom outlet, with no water used.

Designed for plastic separation experiments, university research, material testing, and small-scale recycling trials, it allows users to observe density-based separation and collect the resulting materials for evaluation.

The AMWP Waterless Pelletizing Machine is designed for clean post-industrial plastic waste such as film edge trims, rejected products, and factory scrap. Instead of relying on multiple heating zones, it uses self-friction plasticizing technology, with only the die head heated to approximately 110–120°C.

Plastic film waste is one of the most common challenges in film blowing, bag making, packaging, woven bag, and other plastic processing industries.

Heavy plastic lumps and headstocks pose a challenge for standard recycling machinery. Learn how our 300–500 kg/hr PVC & HDPE Lumps Shredding & Crushing Line uses two-stage size reduction and automatic interlocking controls to process bulky plastic scrap into uniform regrind.

Transform clean HDPE rigid flakes and regrind into high-value, uniform plastic pellets. Discover how our 300–500 kg/hr Plastic HDPE Rigid Pelletizing Line utilizes single-screw extrusion, hydraulic melt filtration, and water-ring pelletizing for continuous output.

Heavy HDPE pipes and thick headstock waste can stall standard recycling equipment. Discover how our automated 300–500 kg/hr two-stage shredding and crushing line streamlines processing, lowers labor costs, and produces uniform, high-quality plastic regrind efficiently.